Minolta Scanner Mode - Manual (Page 266)

Specifying Management Settings 13
Scanner Mode 13-47
13.13.2Specifying Settings Concerning the Confirmation
Screen For Broadcast Transmissions (Mode 014)
You can specify whether or not a screen asking for confirmation of the
settings is displayed before a broadcast transmission.
Setting during production
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side are page number with
descriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX:01)
Bit Function Setting Description
Page
referen
ce
7, 6, 5,
4, 3, 2 - 000000 *Do not change these bits. -
1, 0 Specifies whether or not a
screen asking for
confirmation of the settings
is displayed before a
broadcast transmission. 00 The setting confirmation
screen is not displayed. p. 8-32
01 The setting confirmation
screen is displayed before
a broadcast transmission.
10 The setting confirmation
screen is normally
displayed, regardless of
whether a broadcast
transmission is being
performed.
11 *Do not change this
setting.