Minolta Scanner Mode - Manual (Page 40)

Preparation 3
Scanner Mode 3-7
5 Touch [Network Set].
6 Specify the necessary
settings for the parameters
in the screen that appeared.
❍ For details on specifying
settings for the various
parameters, refer to the
following pages.
7 Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the Basics screen.
✎
Note
After changing the setting of a parameter marked with
, the copier
must be turned off, then on again.
✎
Note
The list of the settings specified for each function can be printed.
For details on printing the list of settings, refer to “Checking the
Settings For Each Function (Settings List)” on page 14-15.