Minolta Scanner Mode - Manual (Page 41)

3 Preparation
3-8 Scanner Mode
Basic Settings screen
The following parameters can be set from the Basic Settings screen.
Parameter Description
DHCP Specify whether to automatically retrieve the IP
address from the DHCP server or to specify a
fixed IP address.
IP Address Type in the IP address of this unit.
*Type in the IP address only if the “DHCP”
parameter is set to “IP Input”.
Subnet Mask Type in the subnet mask of the connected
network.
*Type in the subnet mask only if the “DHCP”
parameter is set to “IP Input”.
Gateway Type in the default gateway address of the
connected network.
*Type in the default gateway address only if the
“DHCP” parameter is set to “IP Input”.
Self-domain Name Type in the domain name of this unit. This setting
is required in order to perform direct fax
transmissions through a mail server.