Minolta Scanner Mode - Manual (Page 249)

13 Specifying Management Settings
13-30 Scanner Mode
3 Touch [Memory Lock On/
Off].
4 Touch the buttons for the
days that printing will be
stopped on.
5 Touch [Stop Time], and then use the keypad to type in the time for
printing to begin.
6 Touch [Start Time], and then use the keypad to type in the time for
printing to stop. Then, touch [Enter].
❍ To cancel the setting, touch [Cancel].
✎
Note
When specifying the time, be sure to select the days.
The time setting is common for all days. Different time periods
cannot be specified for different days.
7 Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).