Intel SX220 - Manual (Page 27)

Viglen SX220 User Guide 26
4 4 . . A A s s s s e e m m b b l l i i n n g g t t h h e e S S y y s s t t e e m m
This chapter will give a step-by-step guide of installing the server board and the main
components in the system. It will give information on how to add add-in cards and
upgrade processors and memory along with other relevant information that may be
of important use.
Before You Begin!
Before you start the assembly process you will need to have the right tools available
to you and you will need to make sure you follow certain basic safety precautions.
Tools and Supplies Needed
Before beginning your work, make sure you have the following tools and supplies
available:
•
Phillips (cross head) screwdriver (#2 bit)
•
Anti-static wrist strap (recommended)
•
Installation / Assembly Safety Instructions
System components must be installed in the order presented below. If installed in a
different order, component damage may occur.
CAUTION!
Integration / servicing of this chassis sub assembly shall be performed only by
technically qualified persons.
Follow these guidelines to meet and maintain safety and product regulatory
requirements when integrating this chassis subassembly.
WARNING!
Do not attempt to modify or use the supplied AC power cord(s) if it is not the exact
type required.
The power supply cords are the main disconnect device to mains (AC power). The
socket outlet shall be installed near the equipment and shall be readily accessible.