Intel SX220 - Manual (Page 65)

Viglen SX220 User Guide 64
Wake on LAN Disabled
Enabled Legacy wake only: Determines the action of the
system when a LAN wake up event occurs.
Wake on PME Disabled
Enabled Legacy wake only: Determines the action of the
system when a PCI Power Management Enable wake
up event occurs.
Wake on RTC Alarm Disabled
Enabled Legacy wake only: Determines the action of the
system when a RTC Alarm Wake up event occurs.
Security Menu
You can make the following selections on the Security Menu itself. Enabling the
Supervisor Password field requires a password for entering Setup. The passwords
are not case-sensitive.
Table 21: Security Menu Features
Feature Choices Description
User Password is Installed
Not Installed Informational Only.
Administrator Password is Installed
Not Installed Informational Only.
Set Administrative
Password
Press <Enter> When the <Enter> key is pressed, a password prompt
appears. Press ESC key to abort. Once set, this can
be disabled by setting it to a null string or by clearing
password jumper on server board.
Set User Password Press <Enter> When the <Enter> key is pressed, a password prompt
appears. Press ESC key to abort. Once set, this can
be disabled by setting it to a null string or by clearing
password jumper on server board.
User Access Level Limited
No Access
View Only
Full Sets the User access level for various BIOS setup
functions.
Password on Boot Disabled
Enabled If your password is set and enabled, the system
prompts you for a password before it boots.
Secure Mode Timer 1 minute
2 minutes
5 minutes
10 minutes
20 minutes
60 minutes
120 minutes Period of PS/2 keyboard and/or mouse inactivity
specified for secure mode to activate. A password is
required for secure mode to function. This option only
appears on the screen after a “user” password has
been entered.
Secure Mode Hot Key
(CTRL-ALT- ) Z
L Key assigned to invoke secure mode features cannot
be enabled unless at least one password is set. This
option only appears on the screen after a “user”
password has been entered.
Secure Mode Boot Disabled
Enabled System boots in secure mode. The user must enter a
password to unlock the system. This option only
appears on the screen after a “user” password has
been entered.
Video Blanking Disabled
Enabled Blank video when secure mode is activated. A pass
word is required to unlock the system. This option only
appears on the screen after a “user” password has
been entered.
Power Switch Inhibit Disabled
Enabled When enabled, the power switch is inoperable.
This option only appears on the screen after a “user”
password has been entered.