Intel SX220 - Manual (Page 28)

Viglen SX220 User Guide 27
Warnings and Cautions!
These warnings and cautions apply whenever you remove the access cover to
access components inside the server. Only a technically qualified person should
integrate and configure the server.
Before removing the access cover for any reason, observe these safety guidelines.
•
Turn off all peripheral devices connected to the server.
•
Turn off the server by pressing the power button on the front of the chassis.
Then unplug the AC power cord from the chassis or wall outlet.
•
Label and disconnect all peripheral cables and all telecommunication lines
connected to I/O connectors or ports on the back of the chassis.
•
Provide some electrostatic discharge (ESD) protection by wearing an
antistatic wrist strap attached to chassis ground—any unpainted metal
surface—when handling components.
WARNING!
The power button on the front panel DOES NOT turn off the AC power. To remove
power from server, you must unplug the AC power cord(s) from the wall outlet or the
chassis.
WARNING!
Hazardous electrical conditions may be present on power, telephone, and
communication cables. Turn off the server and disconnect the power cords,
telecommunications systems, networks, and modems attached to the server before
opening it. Otherwise, personal injury or equipment damage can result.
WARNING!
Do not open the power supply, as there is risk of electric shock and burns from high
voltage and rapid overheating. Refer servicing of the power supply to qualified
technical personnel.