Intermec 751G User Manual
Page 138
Chapter 5 — Network Support
124
751G Color Mobile Computer User’s Manual
Configuring 802.1x Security With Funk Security
This sets 802.1x security on your 751G with Funk security.
1
Make sure you have configured the communications and radio
parameters on your 751G and that Funk is your security choice.
2
Open Intermec Settings. Tap (+) to expand Communications > 802.11
Radio > Funk Security > Profile X with “X” being “1” through “4.”
3
For Association, select “Open” and press Enter. When working with
Cisco Aironet access points, you can select “Network-EAP.”
4
For Encryption, select “WEP” and press Enter.
5
For 8021x, select “PEAP,” “TLS,” “TTLS,” “LEAP,” or “EAP-FAST”
and press Enter.
If you select “TTLS” or “PEAP:”
a
Select User Name, type your user name, then press Enter.
b
Select User Password, type a user password, then press Enter.
c
For Validate Server Certificate, select “Yes,” then press Enter. Note
that you must have the date on the 751G set correctly when you enable
Validate Server Certificate.
d
Enter a User Name and Subject Name. You can also enter a Server 1
Common name or Server 2 Common name to increase security.
If you select “TLS:”
a
Load a user and root certificate on your 751G (
).
b
For Validate Server Certificate, select “Yes,” then press Enter. Note
that you must have the date on the 751G set correctly when you enable
Validate Server Certificate.
c
You must enter a User Name and Subject Name. You can also enter a
Server 1 Common name or Server 2 Common name if you want to
increase your level of security.
If you select “LEAP” or “EAP-FAST:”
Select User Name, then type your user name. press Enter, select User
Password, type a user password, then press Enter.