Intermec 751G - Manual (Page 22)

Chapter 1 — Using the Computer
8 751G Color Mobile Computer User’s Manual
Enabling the Beeper
To enable the beeper:
3 Tap OK to exit this applet.
Adjusting the Beeper Volume
1 Tap Start > Settings > Control Panel. Double-tap the Volume &
Sounds icon, then tap the Volume tab.
2 Drag the slider bar to the right, away from the “Soft” position.
To select a beeper volume for the 751G, tap Start > Intermec Settings,
then tap the Device Settings option. Tap (+) to expand the Beeper option,
then tap (+) to expand the Volume option. Select an item, then tap (+) to
close this option.
Note: Information about the Intermec Settings applet is found in the
Intermec Computer Command Reference Manual (P/N 073529). See your
Intermec representative for information.