Intermec 751G - Manual (Page 62)

Chapter 3 — Configuring the Computer
48 751G Color Mobile Computer User’s Manual
The registry keys used by FolderCopy and other startup components to
retrieve the folder names are as follows:
Flash File Store
[HKLM\Drivers\BuiltIn\FlshDrv]
“FolderName”=“Flash File Store”
SD Card (Storage Card)
[HKLM\System\StorageManager\Profiles\SDMMC]
“Folder”=“Storage Card”
During normal Windows system startup, there are Intermec-specific and
non-Intermec components that require an orderly start to properly
function. These non-Intermec components may also need to start
themselves so the Windows device can function properly. Since there are
possible configurations that come from using one or more optional built-in
peripheral devices, the platform components starting on the next page are
required to manage startup.
RunAutoRun
System components are installed and configured during the power up
process from a single starting point. RunAutoRun (RunAutoRun.exe),
built into the operating system image and located in the “\Windows”
folder, checks for AutoExec (AutoExec.exe) in the “\Flash File Store\2577”
folder.
Folder names used for the mounted volumes are retrieved from the registry
to maintain coherence with the naming of the mounted volumes on the
platform. These folder names are not hard-coded.
AutoExec is reserved for Intermec use to configure Intermec-specific
applications. It launches the CAB installer, AutoCab (AutoCab.exe), to
install platform cab files to the system, such as Intermec Data Collection.
When the AutoExec is complete, RunAutorun then checks for the existence
of AutoRun (AutoRun.exe) and executes this program from the first media
it is found on. This order is Secure Digital (“\SDMMC Disk\2577”),
Object Store (“\2577”), Flash File Store (“\Flash File Store\2577”).
AutoRun is reserved for customer use to configure application launch
sequences. It launches the AutoCab installer and any customer programs
added to the AutoUser.dat file. Shown is the hierarchy of these files:
runautorun
autoexec autorun
autocopy autoreg foldercopy customer
applications
autocab autocab