Intermec 751G - Manual (Page 97)

Chapter 3 — Configuring the Computer
751G Color Mobile Computer User’s Manual 83
GetNetworkType()
Call this function to get the current network type of the radio. Do not
confuse this with GetNetworkMode().
GetSSID()
Call this function to get the desired SSID of the 802.11b/g radio. Call
RadioConnect() before calling this function for this function to work properly.
Syntax UINT GetNetworkType( ULONG & );
Parameters NDIS_NET_TYPE_FH Indicates this is a frequency hopping radio.
NDIS_NET_TYPE_DS Indicates that this is a direct sequence radio.
NDIS_NET_TYPE_UNDEFINED Indicates this radio type is unknown or undefined.
Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks If ERROR_SUCCESS is returned, your ULONG reference is populated with one of the parameters
listed above.
Definitions #ifdef DYNAMIC_LOADING
typedef UINT (*PFN_GetNetworkType)(ULONG &);
#else
UINT GetNetworkType(ULONG &);
#endif
Syntax UINT GetSSID( TCHAR * );
Parameters Pointer to a character array, which is populated with the current SSID
when successful.
Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the
query failed, or ERR_CONNECT_FAILED if a connection with the
radio failed.
Remarks If ERROR_SUCCESS is returned, your TCHAR array is populated with
the desired SSID.
Definitions #ifdef DYNAMIC_LOADING
typedef UINT (*PFN_GetSSID)(TCHAR *);
#else
UINT GetSSID(TCHAR *);
#endif