Pin 4 pin 3 pin 2 pin 1 drain wire drain wire – Intelligent Motion Systems MForce PowerDrive Plus MForce Series Microstepping PowerDrive User Manual
Page 66
A-8
Microstepping MForce PowerDrive Manual Revision R040507
Prototype Development Cable PD02-2300-FL3
IMS recommends the Prototype Development Cable PD02-3400-FL3 for interfacing power to the MForce
PowerDrive.
Motor Power (+12 to +75 VDC)
Power Supply Return (Ground)
Drain Wire (Connect to Earth at Power Supply)
Pin 1 (Red Wire)
10 ft (3.0 m)
Figure A.12: PD02-3400-FL3
Prototype Development Cable PD04-MF34-FL3
The PD04-MF34FL3 is a 10’ (3.0 M) Prototype Development Cable used to connect the MForce PowerDrive
to a stepping motor:
Pair Number
(Cable/Pair)
Color Combination
Interface Signal
MForce Wire Crimp
Connection Pin Number
1/1
Black
Phase A
1
White
Phase A
2
1/2
Black
Phase B
3
White
Phase B
4
Table A.2: PD04-MF34-FL3
Pin 4
Pin 3
Pin 2
Pin 1
Drain Wire
Drain Wire
General Specifications
Length: 10 Feet (3.0 Meters)
Conductor: 16 AWG
Twisted Pairs
Shield: 100% Flexfoil
Jacket: PVC
Figure A.13: PD04-MF34-FL3