IBM Enterprise Server H80 Series - Manual (Page 104)

Ping: Select Ping from the Network Parameters menu to test a connection to a
remote system unit. After selecting the Ping option, you must first choose an
adapter to communicate with the remote system.
Adapter Parameters
Device Slot Hardware Address
1. Gigabit Ethernet 4: U .1-P1-I4/E1 4ac7c 135
2. token-ring 5: U .1-P1-I5/T1 2 357a91 5
3. ethernet Integrated:U .1-P1/E1 6 949d7ac5
4. ethernet 2: U .2-P1-I2/E1 4ac5e692b
5. token-ring 3: U .2-P1-I3/T1 4ac634e38
.------.
|X=Exit|
------'
(PRESS ENTER AFTER MAKING A SELECTION) ===>
After determining which adapter to use to ping the remote system, you must provide
the addresses needed to communicate with the remote system. Select the
appropriate device from the Ping menu to display a screen similar to the following:
PING IP Address
1. Client IP Address [9.3.146.162]
2. Server IP Address [9.3.146.171]
3. Gateway IP Address [ . . . ]
4. Subnet Mask [ . . . ]
.---------. .------.
|E=Execute| |X=Exit|
---------' ------'
===>
88 RS/6000 Enterprise Server Model H80 Series User's Guide