IBM Enterprise Server H80 Series - Manual (Page 168)

Step 2. Loading the Diagnostics
1. Stop all application programs running on the operating system.
2. Stop the operating system.
3. Turn off the power.
4. If you are loading the Standalone Diagnostics and running them from an ASCII
terminal, do the following:
The attributes for the terminal must be set to match the defaults of the
diagnostics.
If you need to change any settings, record the normal settings, and make
sure the terminal attributes are set to work with the diagnostics. If needed,
see “Running the Diagnostics from a TTY Terminal” on page 97.
Return to substep 5 when you finish checking the attributes.
5. Turn on the power.
a. When the keyboard indicator displays, press the numeric 5 key on the
keyboard to load the Standalone Diagnostics or the numeric 6 key on the
keyboard to load the Online Diagnostics.
b. Enter requested passwords.
c. Follow any instructions to select a console.
6. When the Diagnostic Operating Instructions display, go to Step 3. If you are
unable to load the diagnostics, go to “Problem Determination When Unable to
Load Diagnostics” on page 164.
152 RS/6000 Enterprise Server Model H80 Series User's Guide