IBM Enterprise Server H80 Series - Manual (Page 142)

Warning High – The sensor reading indicates a problem with the device. This
could become a critical problem if action is not taken. Run diagnostics on
sysplanar0 to determine what repair action is needed.
Warning Low – The sensor reading indicates a problem with the device. This
could become a critical problem if action is not taken. Run diagnostics on
sysplanar0 to determine what repair action is needed.
Hardware Error - The sensor could not be read because of a hardware error.
Run diagnostics on sysplanar0 in problem-determination mode to determine what
repair action is needed.
Hardware Busy – The system has repeatedly returned a busy indication, and a
reading is not available. Try the service aid again. If the problem continues, run
diagnostics on sysplanar0 in problem-determination mode to determine what
repair action is needed.
This service aid can also be run as a command. You can use the command to list
the sensors and their values in a text format, list the sensors and their values in
numerical format, or a specific sensor can be queried to return either the sensor
status or sensor value.
Run the command by entering one of the following:
/usr/lpp/diagnostics/bin/uesensor -l | -a
/usr/lpp/diagnostics/bin/uesensor -t
token -i index [-v]
Flag Description
-l List the sensors and their values in a text format.
-a List the sensors and their values in a numerical format. For each sensor,
the following numerical values are displayed as:
token index status measured value location code
-t token Specifies the sensor token to query.
-i index Specifies the sensor index to query.
-v Indicates to return the sensor measured value. The sensor status is
returned by default.
126 RS/6000 Enterprise Server Model H80 Series User's Guide