IBM Enterprise Server H80 Series - Manual (Page 196)

Examples for Using the Generic Sample Modem Configuration Files
The following table contains information to help you determine which modem
configuration file to use with various modems.
Customizing the Modem Configuration Files
You can create your own modem configuration files or modify the samples provided.
After you customize your modem configuration files, you
must access them through
the Configure Remote Maintenance Policy Service Aid rather than from the Service
Processor menus.
Note:
If you have already set up your serial ports, line speeds, authorizations, and
telephone numbers from the Service Processor menus, use the service aid to specify
your customized modem configuration files.
If you have not already set up your serial ports, line speeds, authorizations, and
telephone numbers from the Service Processor menus, use the service aids to set
them while you specify your customized modem configuration files.
To disable Auto-Reliable Mode testing of the remote modem, use the sample modem
configuration file /usr/share/modems/modem_f.cfg as a model that you can modify,
as follows:
1. Find the necessary command in your modem manual.
Modem Setup Z Setup Z0
(Rare)
Setup F Setup F0 Setup F1
AT&T DataPort 2001
(Ring interrupt only on
first ring)
X
Bocamodem 1440E X
Hayes Smart Modem 300 X
IBM 5841 X
IBM 5843 X
IBM 7851 X
IBM 7852-10 X
IBM 7855 X
USRobotics
36.6K Sportster
X
Zoom V.32 X
180 RS/6000 Enterprise Server Model H80 Series User's Guide