IBM Enterprise Server H80 Series - Manual (Page 69)

Call-In/Call-Out Setup Menu
This menu is used to configure a modem for the service processor to use to support
the system:
CALL-IN/CALL-OUT SETUP MENU
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
98. Return to Previous Menu
99. Exit from Menus
1>
Modem Configuration Menu, see “Modem Configuration Menu” on page 54.
Serial Port Selection Menu, see “Serial Port Selection Menu” on page 55.
Serial Port Speed Setup Menu, see “Serial Port Speed Setup Menu” on
page 56.
Telephone Number Setup Menu, see “Telephone Number Setup Menu” on
page 57.
Call-Out Policy Setup Menu, see “Call-Out Policy Setup Menu” on page 59.
Customer Account Setup Menu, see “Customer Account Setup Menu” on
page 60.
Call-Out Test Menu tests the configuration after the modem is installed and
configured correctly.
Chapter 3. Using the Service Processor 53