IBM Enterprise Server H80 Series - Manual (Page 31)

Cleaning the Mouse
To clean the mouse, do the following:
1. Remove the retaining ring (1) by turning it counterclockwise, in the direction of
the arrow as shown in the illustration.
1
2
3
2. Remove the ball (2).
3. Inspect the ball for contaminants. Wipe it clean with a dry, lint-free cloth.
4. If the ball is dirty, wash it in warm, soapy water. Rinse and wipe the ball with a
lint-free cloth until dry.
5. Inspect the ball cavity (3) in the mouse for foreign materials. If there are any
foreign materials, remove them.
6. Replace the ball.
7. Replace the retaining ring on the mouse and align it with the open slots in the
ball cavity.
8. Turn the retaining ring clockwise until the open slots are covered and you hear
the ring snap into place.
Chapter 2. Using the Model H80 15