IBM Enterprise Server H80 Series - Manual (Page 109)

Select Language
Select this option to change the language used by the System Management Services
screens and the Service Processor menus.
Select Language
1. English
2. Francais
3. Deutsch
4. Italiano
5. Espanol
6. Svenska
===> .------.
|X=Exit|
------'
Note: To correctly display languages other than English, your ASCII terminal must
support the ISO-8859 character set.
OK Prompt
This option provides access to the Open Firmware command prompt. Use the Open
Firmware command prompt to set up an adapter that is not configurable with the
System Management Services. Documentation supplied with an adapter may direct
you to use this option if it is needed. To exit from the Open Firmware command
prompt, type:
reset-all
or power off the system and reboot.
Exiting System Management Services
After you have finished using the System Management Services, type x (for exit) to
boot your system.
Chapter 4. Using System Management Services 93