IBM Enterprise Server H80 Series - Manual (Page 108)

Restore Default Settings
Restores the boot list to the following default sequence:
Primary diskette drive
CD-ROM drive
Tape (if installed)
Hard disk drive
Network device
Selecting any of the Configure Boot Device options displays a screen similar to the
following.
Configure Nth Boot Device
Device Current Device
Number Position Name
1 1 Diskette
2 4 Ethernet ( loc=U .1-P1-I4/E1 )
3 - Token-Ring ( loc=U .1-P1-I5/T1 )
4 2 SCSI CD-ROM id=1 ( loc=U .1-P1/Z1 )
5 3 SCSI 91 MB Harddisk id=5 ( loc=U .1-P1/Z1 )
.------.
|X=Exit|
------'
===>
OK Prompt: Provides access to the Open Firmware command prompt.
Multiboot Startup <OFF>: Toggles between off and on to select whether
Multiboot menu starts automatically on startup.
92 RS/6000 Enterprise Server Model H80 Series User's Guide