Inter-Tel Axxess User Manual
Page 31
Page 15
Administrator Procedures
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Station Programming
5.
The display shows ENTER STATION OPTION. Select one of the following:
a. Station Flags: This option allows you to set the Administrator Station, Attendant,
and House Phone flags. To select it, press
or the STATION FLAGS menu but-
ton. There are three flags that can be programmed: Administrator, Attendant, and
House Phone. (However, you cannot program the Administrator flag for your own
station or for a single-line station.) To program the flags, do the following:
1. To scroll to the desired flag: Press the high end of the Volume button or
NEXT to scroll forward, or press the low end of the Volume button or PRE-
VIOUS to scroll backward.
2. To enable or disable a displayed flag: Press
or the ON menu button to
enable the flag. Or, press
or the OFF menu button to disable the flag.
3. To save your programming when all flags are set correctly: Press
or
ACCEPT to save the new flag settings. The display shows DATABASE
UPDATED and then returns to the ENTER STATION OPTION prompt.
4. To exit without saving your changes: Press
or
CANCEL to exit. The dis-
play shows NO UPDATE PERFORMED and then returns to the ENTER
STATION OPTION prompt.
b. Station Information: This option allows you to select an attendant for the station or
program the station’s username. To select it, press
or the STATION INFO
menu button. The display shows ENTER STATION INFO OPTION. Select one of
the following:
1. Attendant: To assign an attendant to serve this station, press
or the
ATTENDANT menu button. The display shows ENTER ATTENDANT
EXTENSION. Enter the desired extension number. When the circuit informa-
tion is displayed, press
again to return to the ENTER STATION INFO
OPTION prompt. The display shows DATABASE UPDATED. (Or, to cancel
your entry, press
or CANCEL. The display shows NO UPDATE PER-
FORMED.)
2. Username: To change the username of the station, press
or the USER-
NAME menu button. The display shows ENTER USERNAME. Enter the new
name as described on
. (Or, to cancel your entry, press
or CAN-
CEL. The display shows NO UPDATE PERFORMED.)
1
1
2
#
2
1
#
2