Inter-Tel Axxess - Manual (Page 44)

Page 28
Administrator Procedures
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
Trunk Programming
3. Subject to toll restriction: To program the trunk group Subject to Toll Restric-
tion option, press or the SUBJECT TO TOLL menu button. When the
display shows SUBJECT TO TOLL, press or the YES menu button to
enable the option. Or, press or the NO menu button to disable it. Then
press or ACCEPT to continue.
Trunk List: To program the list of trunks for the trunk group, press or the
TRUNK LIST menu button. When the display shows ENTER TRUNK EXTEN-
SION, enter trunks into the list as follows:
1. Enter a trunk extension using one of the methods described on page 25 .
2. The display shows the extension number and a Yes/No prompt. Press or
the YES menu button, followed by , to include the trunk in the list. Or,
press or the NO menu button, followed by , to exclude the trunk from
the list.
3. When the display returns to ENTER TRUNK EXTENSION, select another
extension number. Or, if finished programming the trunk list, press or
ACCEPT to continue.
c. To exit, press or ACCEPT to move backward through the prompts until you
reach the ENTER DATABASE OPTION prompt.
6. When finished with all programming, press while the ENTER DATABASE
OPTION prompt is displayed. This ends the programming session.
7. If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one
of the following:
•
Delayed Reset: Press or the DELAYED menu button to delay the reset. The
display shows DELAYED RESET SCHEDULED. The system will be reset at the
pre-programmed time.
•
Immediate Reset: Press or the IMMEDIATE menu button to reset the system
now.
NOTE: A system reset will drop all calls in progress.
4
1
2
#
6
1
#
2 #
#
#
#
1
2