Invacare Adjustable ASBA Seat - Manual (Page 16)

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Adjustable ASBA Seat 16 Part No 1143238
SECTION 4—SAFETY INSPECTION/
TROUBLESHOOTING
Safety Inspection Checklist
NOTE: Initial adjustments should be made to suit the end userʹs personal body structure needs
and preference. After initial setup, perform these procedures every time the wheelchair is serviced.
NOTE: Refer to the wheelchair base service manual for a complete safety inspection checklist for
the base.
 Inspect all fasteners.
 Inspect TRRO/TRBKTS fasteners and hardware.
 Ensure clothing guards are secure.
 Arms are secure but easy to release and adjustment levers engage properly.
 Adjustable height arms operate and lock securely.
 Upholstery has no rips.
 Armrest pad sits flush against arm tube.
 Check that all labels are present and legible. Replace if necessary.
 Clean upholstery and armrests.
 Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
 Inspect foam handgrips for damage. If damaged, have them replaced by a qualified
technician.
 Check that all labels are present and legible. Replace if necessary.
 Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
Troubleshooting
NOTE: Refer to the wheelchair base service manual and electronics manual for complete
mechanical and electrical troubleshooting guides for the base and an explanation of error codes.