Invacare Adjustable ASBA Seat - Manual (Page 59)

SECTION 10—JUNIOR BACKS
Part No 1143238 59 Adjustable ASBA Seat
Removing/Installing the Spreader Bar
NOTE: For this procedure, refer to FIGURE 10.4.
Removing
1. Remove the spreader bar cover.
2. Remove the two mounting screws securing the spreader bar to the back canes.
3. Remove the spreader bar from the back canes.
Installing
1. Position the spreader bar against the back canes.
2. Ensure the ends of the spreader bar are flush with the back canes.
3. Loosely install the two mounting screws to secure the spreader bar to the back canes.
Torque to 75 in‐lbs ± 20%.
4. Install the spreader bar cover.
FIGURE 10.4 Removing/Installing the Spreader Bar
Spreader Bar
Cover
Mounting
Screw
Mounting
Screw
Back Cane
Spreader
Bar