Invacare Adjustable ASBA Seat - Manual (Page 37)

SECTION 7—POWER ELEVATING LEGRESTS
Part No 1143238 37 Adjustable ASBA Seat
Adjusting the Footplate Angle
NOTE: For this procedure, refer to FIGURE 7.4.
1. Loosen, but DO NOT remove, the two flat head screws and the two barrel nuts that
secure the footplate to the footplate clamp (Detail “A”).
2. Rotate the footplate clamp on the pivot hinge until the desired angle is achieved
(Detail “B”).
3. Securely tighten footplate to footplate clamp and hinge pivot with the two flat head
screws and barrel nuts.
4. Repeat STEPS 1‐3 for opposite side if necessary.
5. For additional angle adjustment, perform the following (Detail “C”):
A. Loosen the set screw.
B. Rotate footplate up or down to desired position.
C. Retighten set screw.
FIGURE 7.4 Adjusting the Footplate Angle
DETAIL “A” DETAIL “B”
Direction of
Rotation
Set Screw
Barrel Nuts
Footplate
Clamp
Footplate
Flat Head
Screws
Footplate
Footplate
Clamp Pivot Hinge
DETAIL “C”