Adjusting the tension of the flip up footplate – Invacare Adjustable ASBA Seat User Manual
Page 23
SECTION 5—CENTER MOUNT FOOTRESTS
23
Adjusting the Tension of the Flip Up Footplate
Chairs built before 12/01/2008
NOTE: For this procedure, refer to
FIGURE 5.7.
NOTE: The tension can be adjusted to increase
or decrease the rotation effort of the flip up
footplates.
1. Loosen the mounting screw on the
footrest angle hinge to decrease the
rotation effort.
NOTE: DO NOT remove the footplate
mounting screw.
2. Tighten the mounting screw on the
footrest angle hinge to increase the
rotation effort.
3. Repeat STEPS 1 and 2 for the other
footplate.
Chairs built after 12/01/2008
NOTE: For this procedure, refer to
FIGURE 5.8.
NOTE: The tension can be adjusted to increase
or decrease the rotation effort of the flip up
footplates.
1. Loosen the mounting screw on the
front rigging angle hinge to decrease
the rotation effort.
NOTE: DO NOT remove the footplate
mounting screw.
2. Tighten the front rigging angle hinge
mounting screw to increase the rotation
effort.
3. Repeat STEPS 1 and 2 for the other
footplate
FIGURE 5.7 Adjusting the Tension of the
Chairs built before 12/01/2008
FIGURE 5.8 Adjusting the Tension of the
Footplate
Mounting Screw
Footrest
Angle Hinge
Center
Mount
Footrest
Footplate
Mounting Screw
Center Mount
Footrest