Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 13)

13
Quick Overview
R
To pair a different phone with the
system
If you attempt to Pair a different phone
immediately after switching ON the
ignition and the last Paired phone is NOT
available, you will have 2 minutes within
which to enter the the digit sequence
##3#*# to put the system into SIG****
mode.
This is because, when the ignition is
switched ON, the system is looking for the
last Paired phone and if it does not find it
the system will revert to the Handset
screen and drop out of Phone Mode.
To Pair a different phone, select Phone
Mode and use the keypad to enter the
following digit sequence ##3#*#.
Press the Send/End button to initiate the
Pairing process again and to overwrite the
previously Paired phone.
Then, refer to Page 11 at the SIG****
screen.