Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 28)

Hands-free Controls
28
L
Audio panel control functions
The audio panel controls for the XJ,
S-TYPE and X-TYPE are described
below.
Volume control
During a call, the phone volume can be
adjusted with the audio panel volume
control or the steering wheel switches.
The volume will be memorised for future
calls (this will not alter other audio volume
settings).
To adjust: During a phone call, press
MODE on the audio panel repeatedly until
Fade is displayed. Using the volume
control knob or the steering wheel button,
set the fade volume to your personal
preference.
Phone mode
This button will activate the
phone mode, ready to make a
call. The display will indicate
that phone mode has been selected.
This function can also be controlled from
the steering wheel: press and hold button
3, see page 27.
Keypad
Press the digits to enter the required
telephone number. Each key press will
beep and the digits will be displayed on
the audio panel.
The keypad can also be used in Memory
Recall (MR), to enter a location number,
or to scroll up/down the memory
locations.
Cancel
Press and release CANCEL to
clear the last digit of a
telephone number.
Press and hold CANCEL to clear all digits
entered.
Send/end
Press this button to dial the
entered telephone number. It
is also used to end a call that
is in progress.
Memory recall
Press to access the phone
memory location number.
Either a memory location
number can be entered from the keypad,
or memory locations can be scrolled up
and down from the keypad scroll keys.
This function can also be controlled using
steering wheel button 4, see page 27.
Press the upper or lower part of the
control to seek up or down through the
numbers in the phone memory.
Last number redial may also be activated
by pressing and holding the MR button.