Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 31)

31
Hands-free Operation
R
Hands -free operation
RECEIVING A CALL
An incoming call automatically switches
the sound system into the phone mode.
The audio panel display will show Call and
the phone will ring through the vehicle’s
audio system.
If automatic answer has been
programmed the call will automatically
answer after two rings.
To answer:
Press on the steering wheel or;
press on the audio panel.
To end:
Press on the steering wheel or;
press on the audio panel.
Call line Ident
If the caller has the call line ident (CLI)
feature, Call is shown on the audio panel
display, followed by the caller’s phone
number and name (when available). The
display may truncate lengthy names.
MAKING A CALL
When making a call, there are three
methods of dialling: keypad, memory
search and last number redial.
Keypad dialling
To dial:
Press and hold on the steering wheel
or;
press on the audio panel.
Phone will be displayed.
Key in the phone number on the audio
panel keypad. The number will be
displayed.
To connect:
Press on the steering wheel or;
press on the audio panel.
The display will show Calling.
To end:
Press on the steering wheel or;
press on the audio panel.