Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 7)

7
Quick Overview
R
This screen will be displayed to indicate
one of two possible conditions:
1. There is no phone currently Paired to
the vehicle system or no phone is
available. Should this be the case, this
screen will continue to be displayed
while the system is in phone mode
(the system may display the Discover
Me screen ready for you to Pair your
Bluetooth mobile phone).
2. Displayed only for a few seconds if a
phone IS Paired, but whilst the system
is booting-up and looking for a Paired
device. If the last Paired phone is
available and switched on in
Bluetooth mode, then the screen
changes from No BT Phone to Phone
Connected.
Pairing your phone
The following instructions describe how
to initiate Pairing your mobile phone to the
Jaguar system.
If there is no mobile phone Paired to the
vehicle system and the No BT Phone
screen is displayed, Pairing may be
performed as follows:
Select Phone Mode (if not already
selected).
Use the touch-screen keypad to enter the
following digit sequence and press the
green Send/End icon.
The display will then show the following
screen.
At the Discover Me screen the vehicle
system is waiting for communication with
a Bluetooth equipped telephone.
Check that your mobile phone is set to the
Jaguar Bluetooth system, using the menu
functions on the phone. Refer to the
handbook that was supplied with your
specific mobile phone.
When Jaguar device is found on the
mobile phone display, the phone will
prompt you to enter the pass key (1313)
on the mobile phone keypad.
##3#*#