Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 37)

37
Touch-screen Controls
R
MULTIZONE VOICE
(The XJ only, if fitted)
To transfer control of the phone from the
rear of the vehicle to the front, when not
on a call, press
once.
The display will show Phone In Use.
Press a second time and the screen
below will be displayed:
The rear system is now out of phone
mode and the front occupants have full
hands-free control.
To transfer control of the phone during a
call, press
.
For more detailed information, please
refer to the Rear Multimedia handbook.
ADDITIONAL INFORMATION
Continuity of calls
Whilst in a call in hands-free mode, the
call remains connected if the vehicle
ignition is turned OFF (position 0). When
the call ends, another call cannot be
made or received through the vehicle
system unless the ignition switch is
turned to position I or II.
DTMF tones
Whilst in a call you can transmit a DTMF
(Dual Tone Multi-Frequency) tone, to
remotely control equipment such as an
answering machine. Key in the
appropriate numbers on the audio panel
keypad. The numbers entered will be
displayed on the audio panel.
Scratch pad
During a call, the audio panel keypad may
be used to store a number to be dialled
once the current call is terminated. The
number entered will be displayed on the
audio panel: once the current call is
terminated, the number can be dialled by
pressing
on the steering wheel, or
on the audio panel.
Note: DTMF tones may be heard when
entering a number.
Changing a phone number
When making a call, you can change the
phone number shown on the audio
display using the CANCEL button (audio
panel) or C (touch-screen).
A momentary press erases any single
digit, a long press erases the complete
number.
PIN feature
The PIN feature is not supported at
present by the Bluetooth telephone
system.
Therefore, please ensure that your mobile
phone is not locked by a PIN whilst it is
connected to the Bluetooth telephone
system.