Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 30)

Hands-free Controls
30
L
Send/end
Press this button to dial the
entered telephone number. It is
also used to end a call that is in
progress.
This function can also be controlled from
the steering wheel: press and hold
button 4 (see page 29).
CD or TAPE
When a call has ended, press this
button to cycle through CD, Tape
or insert a tape function.
Note: These buttons are inoperative
during a phone call.
Memory recall
Press to access the phone
memory location number. Either a
memory location number can be
entered from the keypad, or memory
locations can be scrolled up and down
from the keypad scroll keys.
This function can also be controlled using
the steering wheel button 4, see page 29.
Press the upper or lower part of the
control to seek up or down through the
numbers in the phone memory.
Display messages - all vehicles
The following messages may be
displayed:
• Call - There is an incoming call.
• Calling - A call is being established.
• Empty - Memory location is empty.
• Location - Memory location number
or prompt for memory location
number.
• No service - No cellular or Bluetooth
service is available.
• Phone - System entering phone
mode.
• Please Wait - phone book
information loading - A short delay
will be experienced whilst information
is transferred from your mobile phone.
• SIG - System Indicator Gauge: this
indicates the current status of the
Bluetooth telephone system.