JVC BR-D95U - Manual (Page 20)

38
4 MENU SWITCH SETTING
4-8 RECORDING CURRENT ADJUSTMENT
Thanks to this function, it is not necessary to adjust the recording current each time the tape is changed.
When a tape with a different optimum recording current is used, this function allows you to take advantage of this
tape’s performance.
If automatic adjustment is performed on a tape which has been used many times, its optimum recording current
may be quite different from that of a new tape. In this case, perform automatic adjustment using the new tape.
Procedure
Activating the recording current adjustment
function
1. Light all [VIDEO INPUT] indicators with the
input video signal switch.
2. Select the PB/EE Auto Switching mode with
the [PB PB/EE] button.
3. Load a recording tape and engage the Stop
mode.
4. Press the [MENU] button and turn the jog dial
to call up the top menu.
[
The top menu screen is shown on the on-
screen display and counter display.
5. Select “00E:OPTIMUM REC CURRENT” on the
top menu with the jog dial.
• “00E” is shown on the counter display and “00E”
blinks on the on-screen display.
6. While keeping the [REC] button pressed, press
the [HOLD] button.
[
Automatic recording current adjustment will
start.
It takes several minutes to complete the
automatic adjustment.
• To interrupt the adjustment, press the [MENU]
button twice.
• When adjustment is finished, the indication
shown on the left is displayed on the on-screen
display.
7. When the indication on the left figure is shown
on the on-screen display, press the [MENU]
button twice.
[
The previous display mode is restored.
• When the adjustment cannot be completed, the
indication shown on the left is displayed on the
on-screen display.
In this case, change the recording position or
replace the recording tape.
00E:OPTIMUM REC CURRENT
HOLD+REC>START
00F:FIXED TIME ENTRY
00:00:00:00
H M F S
H M F S
OPTIMUM REC CURRENT
! ! PERFORM ! ! 10 05
(ABORT > MENU KEY)
OPTIMUM REC CURRENT
! ! END ! ! 10 05
(PUSH MENU KEY)
OPTIMUM REC CURRENT
! ! ERROR ! !
(PUSH MENU KEY)
M H F S
39
D95:525/625
SET+HOLD[POWER OFF>525
00A:MENU SETTING
SET+HOLD INITIAL
00B:DIRECT ACCESS
SET+HOLD>ON
00C:USER PAGE
SET+HOLD>INITIAL
00D:MENU LOCK
SET+HOLD>OFF
DH:DURM HOUR METER
0600
ON
[FF] button
[MENU] button
[HOLD] button [FF] button
M H F S
M H F S
POWER
ON I
OFF O
M H F S
REC
MENU
PLAY PAUSE/STILL
REW STOP FF
EJECT
PHONES CH1 CH2 CH3 CH4 REC
PLAY
PULL FOR VARIABLE
TRACKING
CH1
CH1
CH2 CH3 CH4/ TRACKING
SET HOLD PB PB/EE
COUNTER UB CONDITION
AUDIO
INPUT VIDEO
INPUT
AUDIO MONITOR
PULL
RELEASE
RESET VCON REMOTE
TOP VIDEO AUDIO
OTHERS ON SCREEN TIME CODE SERVO/SYS USER
INSERT
STAND BY
PLAYER SEARCH VAR
P.PLAY
DA3 DA2 DA1 VIDEO ASSEM
IN ENTRY OUT
CANCEL
SHIFT REVIEW
METER MODE TRACKING FINE PREVIEW AUTO EDIT PREROLL
TC
RECORDER
DA4
VIDEO CASSETTE RECORDER BR-D95U
STILL
X-1
REV FWD
X1
CH2 CH3 CH4
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
SIF SDI AES/EBU
AUDIO INPUT / AUDIO MONITOR SELECT
LINE CPN L ANALOG R
PULL RELEASE
CTL P.READ AUTO OFF V.VAR REMOTE PB/EE 16:9 TC UB DF SERVO GEN CF AP 525 OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P 625
Variable Motion
COMPONENT DIGITAL
4-9 HOUR METER DATA DISPLAY
4 MENU SWITCH SETTING
Drum running hours can be displayed on the counter
display and the on-screen display. Use this informa-
tion as a guide to choosing the appropriate mainte-
nance interval.
Procedure
1. Press the [MENU] button.
[ The Menu Display mode is engaged.
2. Select the DH display by turning the jog dial.
[ Hour meter data (drum running hours) is
displayed on the counter display and the on-
screen display (0000H - 9999 H).
3. To return to the normal display mode, press
the [MENU] button.
When the Direct Access function is set to ON,
press the [FF] button to accelerate item
indication.
Direct Access
function
number
Drum running hours