JVC BR-D95U - Manual (Page 42)

82
Notes
● Selecting modes in which
Shuttle Search can be
engaged.
With menu switch No. 301
<DIRECT SEARCH>
set to “OFF (0)”, Shuttle
Search starts only when
the [SEARCH] button is
pressed.
When set to “ON (0)”,
Search can start from any
mode except REC and
REC Pause mode.
● Maximum Search speed
X32, X17 or X6 speed can
be selected with menu
switch No. 340 <SEARCH
SPEED>.
● Use menu switch No. 221
<SEARCH PB AT 1+3/
2+4> to select whether or
not audio is recorded on
the cue track when menu
switch No. 219 <SEARCH
REC CH> is set to CH1+3/
CH2+4.
● Slow Picture mode
With menu switch No. 119
<SLOW PICTURE>
FRAME (0): Slow-motion
frame play-
back
FIELD (1): Slow-motion
field playback
8 PLAYBACK
8-8 SHUTTLE SEARCH/JOG OPERATION
Rapid visual search can be performed with either of two concentric dials; the outer
one serving as a shuttle search dial and the inner one as a jog dial.
● Audio recorded on the tape’s longitudinal cue track or digital audio track is output
during shuttle search and jog operation. (Select the audio during search with
menu switch No. 216 <AUD SEL. AT SEARCH>.)
Shuttle search control
1. Turn the outer dial in the Play/Still/Stop/FF/REW modes.
Turn the dial to FWD (clockwise) to search in the forward direction and to REV
(counterclockwise) to search in the reverse direction.
[ Search starts. Search speed changes as given below in both forward and
reverse directions depending on how far the dial is turned.
Center (STILL) 0[0.03[0.07[0.10[0.20[0.50[ 1.00 [2[4[ 6[
10 [ X32
The maximum search speed can be selected with the menu switch No. 340
<SEARCH SPEED>.
● The Still mode is engaged when the dial is set at the center still click position.
Play speed is X1 (normal) at the first click position in both forward and reverse
directions. Noiseless playback is available from about -1.0x to +1.0x.
In this case, the audio signals on the digital truck of tape are output.
2. To stop search operation
Press PLAY, STOP, FF, or REW depending on which mode is to be engaged
next.
[
The selected mode is engaged. There is no change in the dial position.
When the [SEARCH] button is pressed, search operation starts at the speed
corresponding to the current position of the dial.
Jog operation
1. Turn the inner jog dial.
● Turn the dial in the FWD direction (clockwise) to advance the tape.
Turn the dial in the REV direction (counterclockwise) to reverse the tape.
Search speed corresponds to the speed with which the dial is turned.
● The Still mode is engaged whenever you stop turning the dial.
POWER
ON I
OFF O
M H F S
REC
MENU
PLAY PAUSE/STILL
REW STOP FF
EJECT
PHONES CH1 CH2 CH3 CH4 REC
PLAY
PULL FOR VARIABLE
TRACKING
CH1
CH1
CH2 CH3 CH4/ TRACKING
SET HOLD PB PB/EE
COUNTER UB CONDITION
AUDIO
INPUT VIDEO
INPUT
AUDIO MONITOR
PULL
RELEASE
RESET VCON REMOTE
TOP VIDEO AUDIO
OTHERS ON SCREEN TIME CODE SERVO/SYS USER
INSERT
STAND BY
PLAYER SEARCH VAR
P.PLAY
DA3 DA2 DA1 VIDEO ASSEM
IN ENTRY OUT
CANCEL
SHIFT REVIEW
METER MODE TRACKING FINE PREVIEW AUTO EDIT PREROLL
TC
RECORDER
DA4
VIDEO CASSETTE RECORDER BR-D95U
STILL
X-1
REV FWD
X1
CH2 CH3 CH4
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
SIF SDI AES/EBU
AUDIO INPUT / AUDIO MONITOR SELECT
LINE CPN L ANALOG R
PULL RELEASE
CTL P.READ AUTO OFF V.VAR REMOTE PB/EE 16:9 TC UB DF SERVO GEN CF AP 525 OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20
–10 0 dB dB R P 625
Variable Motion
COMPONENT DIGITAL
Search dial
Jog dial
[SEARCH] button
83
8 PLAYBACK
8-9 VARIABLE SLOW PLAYBACK
POWER
ON I
OFF O
M H F S REC
MENU
PLAY PAUSE/STILL
REW STOP FF
EJECT
PHONES CH1 CH2 CH3 CH4 REC
PLAY
PULL FOR VARIABLE
TRACKING
CH1
CH1
CH2 CH3 CH4/ TRACKING
SET HOLD PB PB/EE
COUNTER UB CONDITION
AUDIO
INPUT VIDEO
INPUT
AUDIO MONITOR
PULL
RELEASE
RESET VCON REMOTE
TOP VIDEO AUDIO
OTHERS ON SCREEN TIME CODE SERVO/SYS USER
INSERT
STAND BY
PLAYER SEARCH VAR
P.PLAY
DA3 DA2 DA1 VIDEO ASSEM
IN ENTRY OUT
CANCEL
SHIFT REVIEW
METER MODE TRACKING FINE PREVIEW AUTO EDIT PREROLL
TC
RECORDER
DA4
VIDEO CASSETTE RECORDER BR-D95U
STILL
X-1
REV FWD
X1
CH2 CH3 CH4
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
SIF SDI AES/EBU
AUDIO INPUT / AUDIO MONITOR SELECT
LINE
CPN L ANALOG R
PULL RELEASE
CTL P.READ AUTO OFF V.VAR REMOTE PB/EE 16:9 TC UB DF SERVO GEN CF AP 525 OVER
–60
–2 –4
+2 +4
0
–40 –30 –20 –10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20 –10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20 –10 0 dB dB R P OVER
–60
–2 –4
+2 +4
0
–40 –30 –20 –10 0 dB dB R P 625
Variable Motion
COMPONENT DIGITAL
[VAR/P.PLAY] button
Search dial
Variable slow playback can be executed using either of the two methods described
below.
Method 1
1. Press the [VAR/P. PLAY] button to engage the Variable mode. The button
lights.
2. Turn the search dial.
Variable slow playback from -1 x to +1x is available.
• Turning the search dial all the way in the REV direction gives you -1x speed.
Turning it all the way in the FWD direction gives you +1x speed.
When the search dial is set to “STILL”, a still picture is displayed.
• The variable slow playback speed is shown on screen.
3. To stop variable slow playback
Press the operation button such as the [PLAY], [STOP], [PAUSE/STILL] and
[SEARCH] buttons.
Noiseless variable slow playback from -1.0x to +1.0x is available. Triple-pair playback heads assure optimum
picture quality.
Cautions
● The V. fade function is enabled only in the Playback, Program Playback or
Variable Slow Playback +1x mode. Under the following conditions, the V. fade
function may also be disabled in the Variable Slow Playback +1x mode.
1. In the first15 seconds after the Variable Slow Playback +1x mode is
activated.
2. When playing a tape recorded on the BR-D40/DY-70 or some BR-D80/
D85s.
● When playback speed is changed from + to – and vice versa, gray lines may
appear at the top or bottom of the screen (except with normal D9-format video
signals). This is normal. It is not a malfunction.
● Noise may appear when the Variable Slow Playback +1x mode is activated.
This is normal. It is not a malfunction.