6 striping rec function, 6 striping rec function 9 other functions – JVC BR-D95U User Manual

Page 48

Advertising

9-6 STRIPING REC Function

9 OTHER FUNCTIONS

When preparing a tape for editing, you can use this function to record the video signals, time code and user bits
set with the <STRIPING REC MENU> on the entire tape.

Operation
1. If the [RECORDER] or [PLAYER] button is illuminated, press the button so

that it goes off.

2. Press the [REMOTE] button to select the “LOCAL” mode for local

operation.

3. Press the [REC] button while holding down the [SHIFT] button to open the

<STRIPING REC MENU>.

[ The current settings are displayed on screen and the counter display.

● The [REC] button blinks.

● The Stop mode is engaged if the tape is running.

4. Load a cassette tape.
[ When the [REC] switch on the cassette is set to “OFF”, “REC INH” blinks on

screen.

5. Change the settings if required.

● Refer to the menu setting contents and procedures on page 95. The settings

are retained even if the power is turned off.

6. Press the [PLAY] button while holding down the [REC] button to start

STRIPING REC.

[ The tape is rewound automatically to the beginning and recording starts.

● During rewind, the [REC] and [REW] buttons blink alternately.

● When recording starts, the blinking “STRIPING” indication lights. The

[PLAY] and [REC] buttons blink simultaneously.

● When the end of the tape is reached, “Complete” is shown on the counter

display, the tape is automatically rewound to the beginning and STRIPING
REC ends.

● The following settings which are automatically set with the STRIPING REC

are reset to the original settings when STRIPING REC is complete.

• VIDEO INPUT] button
• [COUNTER] button
• TIME CODE] (INT/EXT, REC/FREE, PRESET/REGEN) switches
• Menu switch No. 111 <VD REC SIGNAL SEL.>
• If menu switch No. 457 <UB AUTO PRESET> is set to “ON”, the registered

user bit data is restored.

• Audio muting is released.

7. Press the button on the front panel as required so that the “Complete”

indication goes out.

BLACK
(MUTING)
00:58:00:00
00 00 00 00

START
EXIT

V
AUD.SOURCE
TCG PRESET
UBG PRESET

SOURCE

REC+PLAY
STOP

REC INH

CONDITION

CTL

P.READ

AUTO OFF

V.VAR

REMOTE

PB/EE

16:9

TC UB DF SERVO

GEN

525
625

● After this operation, all

buttons except for
[EJECT], [STOP] and
[REC] buttons have no
effect.

● When the [STOP] button

is pressed in this step,
the menu is closed and
the STRIPING REC
mode is released.

● Audio signals are not

recorded.

● Editing operations such

as assembly and insert
cannot be executed. If
an operation other than
the current mode is
executed, for example
when the [PLAY] button
is pressed during rewind,
STRIPING REC ends.

● When another operation

is performed during
recording ([REC] +
[PLAY]), STRIPING REC
ends.

Non-drop frame/drop
frame indication (NTSC
only)

Set with the menu
switch No. 416.
Drop frame:

00:00:00

•

Non-drop frame:

00:00:00:00

● Dropped data cannot be

set in the Drop Frame
mode. Data has 2
frames which are added
(in the Drop Frame
mode).

Menu setting details

On screen

Counter

VID. SOURCE

Video BLACK

AUD. SOURCE
TCG PRESET

00:58:00:00

UBG PRESET

00 00 00 00

Contents
Selects the video signals to be recorded. If non-
input signals are selected, the indication blinks.
BLACK : Selects the built-in black signal. The built-in

color bar signal cannot be selected.

SIF

: Selects the AES/EBU signals. This cannot

be selected if the SA-D95U is not installed.

LINE

: Selects composite signals.

CPN

: Selects component signals.

Muting is always on. Setting is not possible.
Presets the time code.
Presets the user bits.

Settings
BLACK
SIF
LINE
CPN

(MUTING)
Desired value
Desired value (0 - F)

Setting
1. Open the <STRIPING REC MENU>.
Press the [REC] button while holding down the [SHIFT] button.
2. Turn the jog dial to select the item to be set.
3. Change the setting.

●VID. SOURCE: Selecting the video signals
While pressing the [SEARCH] button, turn the jog dial to select the signal.
●TCG PRESET: Setting the time code

1. Press the [HOLD] button.

[

The digit for the time code blinks.

2. Select the digit with the jog dial.

[

The selected digit blinks.

3. While pressing the [SEARCH] button, turn the jog dial to change the

numeric value.

●To cancel the setting, press the [HOLD] button.

[

The menu item selection menu is restored.

●To set all digits to 0, press the [RESET] button.

4. Press the [SET] button to register the setting.

●UBG PRESET: Setting the user bits