JVC BR-D95U - Manual (Page 47)

92
9-5 MULTI CUE-UP FUNCTION
In the Multi Cue-Up mode, up to 8 cue points can be specified and cued up. To engage the Multi Cue-Up mode,
set menu switch No. 389 <MULTI CUE MODE> to “ON”.
9 OTHER FUNCTIONS
1. Engage the Multi Cue-Up mode.
• Set menu switch No. 389 <MULTI CUE MODE> to “ON”. The [ASSEM] button
blinks and the Multi Cue-Up mode is engaged.
2. Set the Counter mode to “TC” with the [COUNTER] button.
3. Play back the tape. Pause the tape at the scene you want to specify as the
cue point.
4. Specify the cue point.
• Press the [ENTRY] button while pressing the [VIDEO] button. The first cue
point is specified and the [VIDEO] button lights.
• To specify the second cue point, press the [ENTRY] button while pressing the
[DA1] button.
• Up to 8 cue points can be specified with the button operation shown in the
table below.
● In the Multi Cue-Up
mode, recording and
editing operations are
disabled.
Cue Operation buttons Display
point
1 VIDEO + ENTRY The [VIDEO] button lights.
2 DA1 + ENTRY The [DA1] button lights.
3 DA2 + ENTRY The [DA2] button lights.
4 DA3 + ENTRY The [DA3] button lights.
5 DA4 + ENTRY The [DA4] button lights.
6 TC + ENTRY The [TC] button lights.
7 IN + ENTRY The [IN] button lights.
8 OUT + ENTRY The [OUT] button lights.
Ⅲ To check specified cue points
Press each button for which a cue point is specified. The time of the specified
cue point is displayed on the counter display.
(e.g.) To check the third cue point, press the [DA2] button.
[ENTRY] button
[ASSEM] button
M H F S
REC
MENU
PLAY PAUSE/STILL
REW STOP FF
EJECT
PHONES CH1 CH2 CH3 CH4 REC
PLAY
PULL FOR VARIABLE
TRACKING
CH1 CH2 CH3 CH4/ TRACKING
SET HOLD PB PB/EE
COUNTER
UB CONDITION
PULL
RELEASE
RESET VCON REMOTE
TOP VIDEO AUDIO
OTHERS ON SCREEN TIME CODE SERVO/SYS USER
INSERT
STAND BY
PLAYER SEARCH VAR
P.PLAY
DA3 DA2 DA1 VIDEO ASSEM
IN ENTRY OUT
CANCEL
SHIFT REVIEW
METER MODE
TRACKING FINE PREVIEW AUTO EDIT PREROLL
TC
RECORDER
DA4
STILL
X-1
REV FWD
X1
PULL RELEASE
CTL P.READ AUTO OFF V.VAR REMOTE PB/EE 16:9 TC UB DF SERVO GEN CF AP 525 OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P
625
8 6 7
1 2 3 4 5
93
9-5 MULTI CUE-UP FUNCTION
9 OTHER FUNCTIONS
Ⅲ To change the specified cue point
Display the image at the cue point you want to change and press the [ENTRY]
button while holding down the corresponding cue point button.
(e.g.) To change the fourth cue point
• Locate the cue point you want to change and press the [ENTRY] button while
holding down the [DA3] button.
Ⅲ To erase the specified cue point
While holding down the button corresponding to the cue point you want to
erase, press the [CANCEL] button.
The corresponding button goes out and the cue point is erased.
(e.g.) To erase the 6th cue point
• While holding down the [TC] button, press the [CANCEL] button. The [TC]
button goes out and the 6th cue point is erased.
5. Perform the Cue-Up operation
Hold down the button corresponding to the required Cue-Up point and press the
[PREROLL] button.
(e.g.) To Cue-Up the third cue point
• Hold down the [DA2] button and press the [PREROLL] button. The third cue
point is cued up and the corresponding still picture is displayed.
6. Quit the Multi Cue mode.
Set menu switch No. 389 <MULTI CUE MODE> to “OFF”.
The [ASSEM] button goes out and the normal mode is engaged.
● When power is turned off,
all specified cue points are
cancelled.
● If the Multi Cue mode is
engaged again before the
power is turned off, the last
cue point specified before
the Multi Cue mode was
previously disengaged can
still be used.
[CANCEL] button
[PREROLL] button [ENTRY] button
M H F S
REC
MENU
PLAY PAUSE/STILL
REW STOP FF
EJECT
PHONES CH1 CH2 CH3 CH4 REC
PLAY
PULL FOR VARIABLE
TRACKING
CH1 CH2 CH3 CH4/ TRACKING
SET HOLD PB PB/EE
COUNTER
UB CONDITION
PULL
RELEASE
RESET VCON REMOTE
TOP VIDEO AUDIO
OTHERS ON SCREEN TIME CODE SERVO/SYS USER
INSERT
STAND BY
PLAYER SEARCH VAR
P.PLAY
DA3 DA2 DA1 VIDEO ASSEM
IN ENTRY OUT
CANCEL
SHIFT REVIEW
METER MODE
TRACKING FINE PREVIEW AUTO EDIT PREROLL
TC
RECORDER
DA4
STILL
X-1
REV FWD
X1
PULL RELEASE
CTL P.READ AUTO OFF V.VAR REMOTE PB/EE 16:9 TC UB DF SERVO GEN CF AP 525 OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P OVER
–60
–2
–4
+2 +4
0
–40 –30 –20
–10
0 dB dB R P
625