Jura Capresso Impressa 68193 - Manual (Page 14)

Factory Settings for Beverage Buttons:
• All coffee buttons are set to temperature
HIGH .
• The hot water function is set to XHIGH .
• 1-CUP Espresso button (Fig. 2,C) 2 oz./ STRONG .
• 2-CUP Espresso button (Fig. 2,F) 2 oz. per cup / XSTRONG .
• 1-CUP Coffee button (Fig. 2,D) 5 oz./ STRONG .
• 2-CUP Coffee button (Fig. 2,G) 5 oz. per cup / XSTRONG .
• A La Carte button (Fig. 3A,N) 7 oz.
• Cappuccino; one-touch button (Fig. 3.6) 14 seconds milk, 0
seconds pause, 2 oz. coffee / NORMAL .
• Latte Macchiato; one-touch button (Fig. 3.7) 14 seconds milk,
15 seconds pause, 2 oz. coffee / STRONG .
• Milk portion; Selector Dial (Fig. 3.5) 14 seconds milk,
• Water Portion; Selector Dial, 5 oz.;
XHIGH .
Other Factory Settings:
• 5-hour auto shut-off.
• Water hardness setting:
10ºdH .
• Filter: FILTER NO (Clearyl Water Care Cartridge: not installed)
• Language: English.
• Display:
AM/PM and OZ .
• Economy Mode (energy saving): Off
• Time / Weekday:
--.-- (not set)
• Automatic On and Off times: not set
• Cappuccino Rinsing: set to
NOW ; display shows
CAPPUCCINO RINSING immediately after frothing milk.
6. PREPARING THE MACHINE FOR THE FIRST TIME
• Make sure all accessories, literature and any other items are
removed from the bean container and the water tank.
• DO NOT install the Clearyl water filter now (chapter 13a).
• Make sure the machine sits on an even, flat surface and the
drawer and used coffee container are inserted (Fig. 1).
• Plug-in machine.
6a. FILLING THE WATER TANK
Please note: Only use fresh, cold water. Never fill water tank
with carbonated water, milk or any other liquid.
• Remove the water tank, rinse and fill with fresh, cold water.
• Replace water tank and make sure that it engages securely.
6b. FILLING THE BEAN CONTAINER
Please note: To insure that the conical burr grinder will work for
a long time, do not use it with any kind of coated or flavored
beans (all coating and flavors contain sugar or sugar substances).
Such coating can damage the burrs. Using such beans voids the
warranty. Have your coffee store grind the sugar coated beans
and use as described in chapter 9e.
Flavored Coffee: If you like flavored coffees we recommend
adding flavors to your coffee after brewing. This way you can
use your regular coffee beans in the bean container. Adding the
flavors after brewing lets you control the flavor intensity much
better than with pre-flavored coffee. Your local coffee store
typically carries a variety of liquid flavors.
• Open the Cover Lid (Fig. 5).
• Remove the Aroma Protection Lid (Fig. 6).
• Make sure the bean container is empty and clean. Fill beans
into the bean container (Fig. 7).
Frozen Beans: Thaw 3 to 4 hours before adding to bean
container. This prevents moisture from seeping into the grinder.
14.