Jura Capresso Impressa 68193 User Manual

Page 17

Advertising
background image

Please note: You can always stop the brewing process by
pressing any of the coffee buttons.

9c. OVERRIDING STRENGTH AND CUP SIZE DURING
BREWING
During brewing you can override the strength of the two one-
cup buttons (Fig. 2, C, D) and the cup size of all four coffee
buttons. When using the two-cup buttons the S9 OT automati-
cally selects the maximum strength. Overriding will not change
the factory setting (chapter 5).
Example:
• Open the cover for the Rotary Dial (Fig. 1.19).
• Push the 1-Cup Coffee Button (Fig. 2D).
• During grinding turn the Rotary Dial to change the strength to

e.g. XSTRONG (5 bean graphic). The display shows the
selected strength.

• When the coffee starts brewing, turn Rotary Dial until the display

shows, e.g.

7.0 OZ.

The S9 OT will brew 7.0 oz of coffee.

If you use the same coffee button again and do not use the
Rotary Dial, the S9 OT will brew a cup according to the
programmed settings for this button.
Please note: When using one of the 2-Cup buttons you can
only change the cup size. The display shows the amount per
cup, e.g.

6.0 OZ

; the S9 OT will brew a total of 12 ounces.

For re-programming see chapter 11 (cup sizes) and chapter 14.1
for cup sizes, temperature and strength.

9d. THE A LA CARTE BUTTON
The S9OT has a fifth coffee button (Fig. 3A,N). With this button
you can change the coffee volume and the coffee strength just

before brewing.

COFFEE READY

.

• Push the A LA CARTE button (Fig. 3A.N). The display shows

A LA CARTE

and the strengths indicated by the bean graphic

e.g. 2 beans (mild).

• Turn the Rotary Dial to choose any of five strength settings:

XMILD

,

MILD

,

NORMAL

,

STRONG

,

XSTRONG

, indicated by

1 to 5 beans in the bean graphic.

• Then push the Rotary Dial. The machine starts grinding. Now

dial the coffee volume.

Please note: If you push the A LA CARTE button and do not
push the Rotary Dial within a few seconds, the display will
revert to

COFFEE READY

.

9e. USING PRE-GROUND COFFEE
You can also use pre-ground coffee, bypassing the grinder. This
is convenient if someone requests decaf coffee or a decaf
cappuccino or flavored coffee.
Please note: Never fill the funnel with instant coffee. Do not fill
the funnel with more than two scoops. The funnel is not a
storage container. If coffee is ground too fine the brewing
process may be stopped.

COFFEE READY

• Open cover (Fig. 1,19) and push the Ground Coffee button

(Fig. 3A,O).

FILL PRE-GROUND / COFFEE READY

.

• Fill 1 or 2 level measuring scoops of ground coffee into the

opening for ground coffee (Fig. 1,11) and close the lid.

• Now push one of the four coffee buttons to brew your coffee

e.g.

1 COFFEE

. The pre-ground coffee is tamped and brewed.

ENJOY

, then

COFFEE READY

.

17.

Advertising