Seiko Group BP-6000 - Manual (Page 31)

About basic setup options
The setup options serve to define various initial states of the printer that are executed when the
power is turned on or when the RESET key is pressed. In addition, this mode serves to
redefine the font type, character spacing, and other parameters for the printer's current
operating conditions. The parameters set in the setup options are stored in the memory of the
printer and used as the default values in initialize operations.
❏ To set this option
When the SETUP key is pressed in the offline mode, the printer enters the function setup
mode, where various functions can be set. The keys used in the function setup mode are
described below.
←
and
→
[Alternate to the PARK and TOF SET]
These keys are used to change the menu in the display, but cannot be used to
select a menu item.
↓
and
↑
[Alternate to the M.LF/M.RLF]
These keys are used to change an item within a menu in the display, but cannot
be used to set an item parameter.
ENTER [Alternate to the BIN]
When this key is pressed while an item on the menu is displayed, the content of
the item is stored in the memory of the printer.
When the content of the item is saved, an asterisk (*) indicating that the item is
the currently selected parameter is added at the end of the item.
EXIT [Alternate to the SETUP]
When this key is pressed, the printer exits from the setup options and enters the
offline mode.
ONLINE
This key's function is similar to the EXIT key in that the printer exits from the
setup options. At that time, if no errors or irregular conditions exist, the printer
enters the online mode.
PARK TOF SET
ENTER
SETUP M.RLF
LF M.LF FF
TEAR OFF RLF ON LINE
P . OUT
ON LINE
POWER
EXIT
BIN
L C D
RESET
Select function Select menu
Register selected setups
Exit setup to offline
Exit setup to online
24
4. Basic setup options
4. Basic setup options