Seiko Group BP-6000 - Manual (Page 69)

PRINTED PATTERNS EXAMPLE
4. Judging from the printed pattern in each print mode, select the grade number of a best aligned
pattern between +3 and -3.by pressing the Left and Right arrow keys.
5. Press the ENTER key to set the printing condition. Printing for the next mode automatically
starts.
6 Repeat the steps 4 and 5 for modes 1 through 4.
7 After all adjustment is completed, the LCD displays " PRESS RESET SW ". By pressing the
RESET key, the printer exits from this vertical alignment mode.
62
Description of Patterns
The printer has 13 preprogrammed patterns in each mode from which only seven
patterns are printed. The pattern "****..." indicates out-of-range. Consult your
dealer if you cannot find correct pattern.
8. Maintenance (Vertical alignment mode)