Seiko Group BP-6000 - Manual (Page 52)

Enable barcode command
This function enables the printer to accept the bar cord command and to print the bar cord
accordingly.
Set barcode type
This function selects a type of bar code.
Bar code type element enables a user to
print bar code by varying width of narrow
bar, wide bar, narrow space, wide bar,
or intercharacter gap.
See Appendix B, "Bar code control
code" for details.
27 BARCODE
BC : MODE 1
BC : MODE 2
BC : IGNORED
28 BC TYPE
TYPE: INDST25
TYPE: INTRL25
TYPE: MTRIX
TYPE: CODABA
TYPE: CODE11
TYPE: CODE39
TYPE: CODE93
TYPE: C128
TYPE: EAN-8
TYPE: EAN-13
TYPE: UPC-A
TYPE: UPC-E
TYPE: POSTNET
TYPE: ELEMENT
45
5. Extended setup options (27-28)
.................... ESC SO and ESC SI can not be used for.
.................... ALL control command are valide.
.................... Bar Code is invalid.