Seiko Group BP-6000 - Manual (Page 50)

Line feed (LF)
A function for executing the carriage return operation when receiving the line feed command
(LF code) is selected or deselected.
Set vertical tabs (VT) in BP-A/I mode
This function sets the vertical tab command code (0Bh) in BP-A or BP-I mode either to move
to next vertical tab with or without printing buffer content.
IBM 20 cpi character spacing
This function selects a condensed elite character (20 cpi) to be printed in either 20 cpi as in the
latest IBM emulation or 12 cpi (normal elite character spacing which is used in the IBM
emulation, Proprinter II or older).
IBM download character table
This function selects between the country and multilingual character sets to be used in the
download area. See the character sets in appendix.
22 VT SETTING
VT: WITH PRINT
VT:WITHOUT PRNT
.................... Move to a next vertical tab after printing.
.................... Move to a next vertical tab without printing.
23 20CPI SETTING
IBM 20CPI: YES
IBM 20CPI: NO
24 DWNLD CHR ST
COUNTRY SET
MULTILINGUAL
43
5. Extended setup options (21-24)
21 LF SETTING
LF : LF ONLY
LF : CR+LF
.................... Line feed without a carriage return
.................... Line feed with a carriage return