Standard Horizon Gx5500s - Manual (Page 13)

Page 13 GX5500S
8.6 CHANGING THE TIME LOCATION
Set the radio show UTC time or local time with the offset inputted in section 8.5
CHANGING THE GPS TIME.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Time Display Time Display Time Display Time Display Time Display” in
the “ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
UTC UTC UTC UTC UTC” or
“ Local Local Local Local Local.”
5. Press the [ENT] key to store the selected setting.
6. Press the [CLR] key to return to the “
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup”
menu, then press the [CLR] key again to return to
radio operation.
8.7 CHANGING COG TO TRUE OR MAGNETIC
Allows the GPS Course Over Ground to be selected to show in True or Mag-
netic. Factory default is True however following the steps below the COG can
be changed to Magnetic.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Magnetic Magnetic Magnetic Magnetic Magnetic” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
Mag- Mag- Mag- Mag- Mag-
netic netic netic netic netic” or “True True True True True.”
5. Press the [ENT] key to store the selected setting.
6. Press the [CLR] key to return to the “
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup”
menu, then press the [CLR] key again to return to
radio operation.