Standard Horizon Gx5500s - Manual (Page 64)

GX5500S Page 64
12.11 CHANNEL NAMING
This selection allows you to customize the name of a channel from the default
name.
Example: CH69 PLEASURE to HOOKUP
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ CH Name CH Name CH Name CH Name CH Name” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be named and press the [ENT] key.
5. Press the one of the Keypad keys to enter the first
letter of channel name.
Example: Press the [4(GHI)] key repeatedly to toggle
among the seven available characters associated
with that key:
4 4 4 4 4
Æ
G G G G G
Æ
H H H H H
Æ
IIIII
Æ
g gg gg
Æ
h hh hh
Æ
iiiii
Æ
2 2 2 2 2 ....
6. Press the [ENT] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat step 5 and 6 until the name is complete.
The name can consist of up to 16 characters. If you
do not use all 16 characters, press the [ENT] key to
move to the next space. This method can also be
used to enter a blank space in the name. To clear
the previous letter, press the [CLR] key.
8. Press and hold down the [ENT] key to enter the
name.
9. If you want to enter the name of another channel, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.