Standard Horizon Gx5500s - Manual (Page 65)

Page 65 GX5500S
12.12 NAMING THE RADIO OR
SECOND STATION MIC OR HANDSET
This function allows you to change the name of the RADIO or second station
microphone. Example: “RADIO - Cabin,” “RAM1 - Flybridge.”
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Unit Name Unit Name Unit Name Unit Name Unit Name” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. With the second station mic or handset connected,
turn the CHANNEL selector knob to select the Unit
(“
Radio Radio Radio Radio Radio” or “RAM1 RAM1 RAM1 RAM1 RAM1”) to be named, then press the
[ENT] key, otherwise press the [ENT] key.
5. Press the one of the Keypad keys to enter the first
letter of channel name.
Example: Press the [2(MEM)] key repeatedly to
toggle among the seven available characters asso-
ciated with that key:
2 2 2 2 2
Æ
A A A A A
Æ
B B B B B
Æ
C C C C C
Æ
a aa aa
Æ
b bb bb
Æ
c cc cc
Æ
2 2 2 2 2 ....
6. Press the [ENT] key to enter the first letter in the
name and step to the next letter to the right.
7. Repeat step 5 and 6 until the name is complete.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the [ENT] key to move to the next space.
This method can also be used to enter a blank space in the name. To clear
the previous letter, press the [CLR] key.
8. Press and hold the [ENT] key to enter the name and return to the “ Unit Unit Unit Unit Unit
Name Name Name Name Name” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.