Standard Horizon Gx5500s - Manual (Page 60)

GX5500S Page 60
12.3 TIME DISPLAY
Allows the time shown on the display to be shown in local or UTC time. Time is
displayed when the optional GPS unit is connected.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Time Display Time Display Time Display Time Display Time Display” in
the “ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
UTC UTC UTC UTC UTC” or
“ Local Local Local Local Local.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
In the local time mode, the display shows the time by the 12-hour system,
while the display shows the time by the 24-hour system in the UTC mode.
12.4 SOG (SPEED OVER GROUND) UNIT
Allows the SOG shown on the NAV display to be shown in Knot, MPH or KPH.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ SOG Unit SOG Unit SOG Unit SOG Unit SOG Unit” in the
“
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select desired
unit.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
(“UTC” mode) (“LOCAL” mode)