Standard Horizon Gx5500s - Manual (Page 63)

Page 63 GX5500S
12.9 KEY BEEP
This selection is used to select the beep tone volume level when a key is
pressed.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Key Beep Key Beep Key Beep Key Beep Key Beep” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to to select the
desired level. The contrast level can be set from
“
Level 1 Level 1 Level 1 Level 1 Level 1” to “Level 6 Level 6 Level 6 Level 6 Level 6,” “High High High High High,” or “Off Off Off Off Off,”
5. Press the [ENT] key to set the key beep condition.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.
12.10 WEATHER ALERT SETUP
This selection allows the NOAA Weather alert to be turned off. Default setting
is “On SCAN and WX CH.”
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Weather Alert Weather Alert Weather Alert Weather Alert Weather Alert” in
the “ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be
set to “
On WX CH On WX CH On WX CH On WX CH On WX CH,” “On SCAN On SCAN On SCAN On SCAN On SCAN,” “On SCAN and On SCAN and On SCAN and On SCAN and On SCAN and WX WX WX WX WX
CH CH CH CH CH,” or “Off Off Off Off Off.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.