Standard Horizon Gx5500s - Manual (Page 62)

GX5500S Page 62
12.7 SCAN TYPE
This selection is used to select the scan mode between “Memory Scan” and
“Priority Scan.”
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ SCAN Type SCAN Type SCAN Type SCAN Type SCAN Type” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
Priority Priority Priority Priority Priority
SCAN SCAN SCAN SCAN SCAN” or “Memory SCAN Memory SCAN Memory SCAN Memory SCAN Memory SCAN.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
12.8 SCAN RESUME TIME
This selection is used to select the time the GX5500S waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ SCAN Resume SCAN Resume SCAN Resume SCAN Resume SCAN Resume” in
the “ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
1sec 1sec 1sec 1sec 1sec” through “5sec 5sec 5sec 5sec 5sec,” or “Off Off Off Off Off.” In the “Off Off Off Off Off” selection,
the scanner will resume after the other station stops
transmitting (carrier drops).
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.