Standard Horizon Gx5500s - Manual (Page 76)

GX5500S Page 76
13.5 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “11
DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP MODE” for
details). However, the LAMP, CONTRAST, and KEY BEEP menu item which is
accessed from the RAM+ only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL(SET)MENU] key until “
RADIO SETUP RADIO SETUP RADIO SETUP RADIO SETUP RADIO SETUP” menu
appears.
2. Press the [
S]/[T] key to select “RADIO SETUP RADIO SETUP RADIO SETUP RADIO SETUP RADIO SETUP” or “DSC SETUP DSC SETUP DSC SETUP DSC SETUP DSC SETUP” menu.
3. Press the [CALL(SET)MENU] key, then select the menu item you wish to
work on by pressing the [
S]/[T] key.
4. Press the [CALL(SET)MENU] key.
5. Press the [
S]/[T] key to change the value or condition for the menu item,
then press the [CALL(SET)MENU] key to save the new setting.
6. Press the [
S]/[T] key to select “EXIT
EXIT EXIT EXIT EXIT,” then press the [CALL(SET)MENU]
key to return to the normal operation.
RADIO SETUP Function
DIMMER Adjusts the backlight
CONTRAST Contrast adjustment of the display
NAV DISPLAY Selects Lat/Lon or SOG to be displayed
SOG UNIT Knots, MPH or KPH selection
MAGNETIC True or Magnetic selection
KEY BEEP On or off selection
UNIT NAME Allow changing the name of the connected mic
EXT SPK Internal or External speaker selection
EXIT Exits the RADIO SETUP menu
DSC SETUP Function
INDIVIDUAL DIR Setup the Individual Directory
INDIVIDUAL REPLY Auto or manual selection
INDIVIDUAL ACK Able or Unable to acknowledge Individual Call
INDIVIDUAL RINGER Selects from 1 to 4 rings
GROUP DIR Setup the Group Directory
POSITION REQUEST Auto or manual selection
DSC BEEP Turns on or off the Individual, Group, Position request or send beep
EXIT Exits the DSC Setup menu