Sharp FODC550 - Manual (Page 36)

34
CREATING MARGINS WHEN COPYING
(Margin shift)
The margin shift function is used to automatically shift the text or image or the copy
paper approximately 1/2".
As shown below, LONG EDGE or SHORT EDGE can be selected.
1 Place the original(s).
2 Press the [E-SORT/SP.FUN] key until
"MARGIN SHIFT" appears and then press
the [ENTER] key.
• This feature cannot be used with the 2 IN 1 feature.
• The margin width can be changed with "MARGIN WIDTH" in the user
programs. (p.64)
• Note that a margin is created by shifting the image, and thus if the
image is shifted too far, the edge of the image may be cut off.
LONG EDGE SHORT EDGE
RSPF
Document glass
Margin Margin
Original
Copy
AB
AB
AB
AB
Note
SPECIAL FUNCTION
MARGIN SHIFT
FO-DC550_Copy(Sec).book 34 ページ ２００４年３月２５日 木曜日 午後３時４４分